Reggae Reggae Sauce safe in Roots hands

first_imgLevi Roots wins legal battle to preserve control of his award winning Reggae Reggae Sauce.LONDON, England, Thursday December 1, 2011 – Jamaican-born condiment king Levi Roots has been allowed to hold on to ownership rights for his famous Reggae Reggae Sauce.Brixton cafe owner Anthony Bailey has lost his High Court fight to be recognised as the creator of the recipe for the sauce made famous by Dragons’ Den contestant Roots.Bailey had claimed that Roots had derived the sauce from his “unique and secret recipe”.However, Judge Mark Pelling QC dismissed Bailey’s claims for breach of contract and breach of confidence.The judge said Bailey’s recipe was “riddled with imprecision”. He said: “There is nothing special either about the ingredients or the methodology of making them into a sauce.”Judge Pelling questioned whether the recipe was “ever secret”.“This was not merely a claim which fails because it was misconceived,” said the judge. “Rather it was a claim which was advanced in circumstances where, to the knowledge of the defendants, they had no proper basis for advancing it.He told the court: “This was a dishonest claim, dishonestly advanced.”Bailey, who moved to England from Jamaica and runs the Blessed West Indian Takeaway in Brixton, south London, had made the claim alongside financial adviser Sylvester Williams.Bailey told the court that he had “devised his own jerk sauce” and recorded his recipe in the West Indies more than 25 years ago.However, Roots, 53, who also lives in Brixton and was born in Jamaica, contested the claims, which he said were a “cynical and dishonest attempt to take advantage of his ingenuity and hard work”.He said he “started experimenting” with sauce recipes in 2005 and invented the “Reggae Reggae” title either later that year or in early 2006.Lawyers said they estimated the legal battle had cost more than £1m in total and the judge said Roots was entitled to have his costs paid.Although the judge ruled in Roots’s favour, he told the court he had concluded he “could not safely rely” on either the evidence of claimants or that of Roots.In his ruling, Judge Pelling said: “Mr Roots accepted that… the suggestion contained in literature prepared in connection with the product that the product was based on his grandmother’s recipe was untrue.“Mr Roots attempted to explain these untruths away as ‘marketing’. Whilst the process will usually involve maximising what can legitimately be said in respect of the product or service concerned, it does not involve what can properly, if legalistically, be called fraudulent misrepresentations”. Caribbean 360 News 15 Views   no discussions Share NewsRegional Reggae Reggae Sauce safe in Roots hands by: – December 1, 2011 Tweetcenter_img Sharing is caring! Share Sharelast_img read more

Walter Jordan

first_imgLifelong Milan Farmer, Walter H. Jordan, 96 passed away Wednesday October 19, 2016 at the Seasons in Milan.  Walter was born in Milan November 9, 1919 the son of Henry and Elise (Oswald) Jordan.  He graduated from Milan High School and married Wilma Ann (Miller) Jordan April 10, 1948 and she preceded him in death November 27, 2012.Walter was a lifetime member of the St. Paul Lutheran Church, was a former member of the Odd Fellows Lodge, had been an active member of the Farm Bureau, and was very active  in Republican Party politics, having formerly served at Franklin Township Trustee.Walter is survived by son Bill (Judy) Jordan of Milan, daughter Linda Jordan of Santa Fe, New Mexico, Grandchildren Brian (Ann) Lehnen, Rebecca Lehnen, Sarah Lehnen (Josh) Newman, Stephen Jordan, Robert (Jennifer) Jordan and Thomas Jordan, Great Grandchildren David, Daniel, Hannah, and Grace Jordan, Nathan Newman and Nik Lehnen, and a host of friends.  He was preceded in death by brothers Harry and Elmer Jordan, sisters Mildred Schutte, Margaret Kinnett, and Dorothy Jordan.Funeral services will be at 2PM Sunday October 23, 2016 at the St. Paul Lutheran Church, 7124 N. St. Road 101, Milan, 47031 with Pastor Sue Socha officiating.  Burial will follow in St. Paul Lutheran Cemetery.  Visitation will be Saturday 5-7PM at Laws-Carr-Moore Funeral Home, Milan, and 1 hour prior to services Sunday at the church.   Memorials may be made to either St. Paul Lutheran Church or St. Paul Lutheran Cemetery.  Laws-Carr-Moore Funeral Home entrusted with arrangements, 707 S. Main St. Box 243 Milan, In 47031  (812)654-2141.  Go to www.lawscarrmoore to leave an online condolence message.last_img read more

Enhanced reliability and performance in motor control encoder applications

first_imgThis article focuses on key benefits for motor control applications using the 50 Mbps (25 MHz) ADM3065E RS-485 transceiver and the ADSP-CM40x mixed-signal control processor. The RS-485 transceiver is designed for reliable operation in harsh environments such as motor control encoders, with added noise immunity and (IEC) 61000-4-2 electrostatic discharge (ESD) robustness. By Jens Sorenson and Richard Anslow, Analog Devices               Download PDF version of this articleRotary encoders are widely used in industrial automation systems. A typical use of this type of encoder is for electric machines where the encoder is connected to the rotating shaft, and thereby provides feedback for the control system. While the primary purpose of the encoder is angular position and speed measurement, additional features, such as system diagnostics and parameter configuration, are common as well. Figure 1 shows a motor control signal chain using RS-485 transceivers and microprocessor to interface between the absolute encoder (ABS encoder) slave and industrial servo drive master for closed-loop control of an AC motor. The RS-485 communication link between the servo drive and ABS encoder typically requires high data rates up to 16 MHz and low propagation delay timing specifications. The RS-485 cabling typically extends to a maximum of 50 meters, but in some cases can be as long as 150 meters. Motor control encoder applications are challenging environments for data communications, because electrical noise and long cable lengths affect the integrity of RS-485 signaling.Figure 1. Using RS-485 to interface between the absolute encoder slave to servo drive master for closed-loop control of an AC motor RS-485 signaling is balanced, differential, and inherently noise immune. System noise couples equally to each wire in an RS-485 twisted pair cable. One signal emits the opposite of the other signal, and electromagnetic fields coupled onto the RS-485 bus cancel each other out. This reduces the electromagnetic interference (EMI) of the system. In addition, the enhanced ADM3065E 2.1V drive strength allows greater signal-to-noise ratio (SNR) in communications. Adding signal isolation to the ADM3065E can be easily implemented using the ADuM141D. The device is a quad-channel, digital isolator based on Analog Devices i Coupler technology. It can operate at a data rate of up to 150 Mbps, making it suitable for operation with the 50 Mbps ADM3065E RS-485 transceiver (figure 2). Direct power injection (DPI) measures the ability of a device to reject noise that is injected into the power supply or input pins. The isolation technology used in the ADuM141D has been tested to the DPI IEC 62132-4 standard. The noise immunity performance exceeds that of similar products. The device maintains excellent performance over frequency, but other isolation products exhibit bit errors in the 200 MHz to 700 MHz frequency band.Figure 2. Signal isolated, 50 Mbps RS-485 solution (simplified diagram—all connections not shown) ESD on the exposed RS-485 connectors and cabling for the encoder to motor drive is a common system hazard. The system-level IEC 61800-3 standard relating to EMC immunity requirements for adjustable speed electrical power drive systems requires a minimum ±4kV contact/±8kV air IEC 61000-4-2 ESD protection. The ADM3065E exceeds this requirement with ±12kV contact/±12kV air IEC 61000-4-2 ESD protection. Figure 3 shows the 8kV contact discharge current waveform from the IEC 61000-4-2 standard compared to the human body model (HBM) ESD 8kV waveform. Figure 4 shows that the two standards specify a different waveform shape and peak current from one another. The peak current associated with an IEC 61000-4-2 8kV pulse is 30A, while the corresponding peak current for the HBM ESD is more than 5× less, at 5.33A. The other difference is the rise time of the initial voltage spike, with IEC 61000-4-2 ESD having a much faster rise time of 1ns, compared to the 10ns associated with the HBM ESD waveform. The amount of power associated with an IEC ESD waveform is much greater than that of an HBM ESD waveform. The HBM ESD standard requires the equipment under test (EUT) to be subjected to three positive and three negative discharges – while in comparison, the IEC ESD standard requires 10 positive and 10 negative discharge tests. The ADM3065E with the IEC 61000-4-2 ESD ratings is better suited for operation in harsh environments compared to other RS-485 transceivers that state varying levels of HBM ESD protection.A number of communication protocols are used for encoders; for example EnDat, BiSS, HIPERFACE, and Tamagawa. Despite their differences, the encoder communication protocols have similarities in regard to implementation. The interfaces of these protocols are serial bidirectional pipes that comply with either the RS-422 or RS-485 electrical specifications. While there are commonalties in the hardware layer, the software required to run each of the protocols is unique. Both the communication stack and the required application code are specific to the protocol. This article focuses on hardware and software implementation of the master side of an EnDat 2.2 interface.Figure 3. IEC 61000-4-2 ESD waveform at 8kV compared to the HBM ESD waveform at 8kV Delays fall into two categories: first, there is the transport delay of the cable, and second, there is the propagation delay of the transceivers. The speed of light and the dielectric constant of the cable determines cable delay with typical numbers of 6ns/m to 10ns/m. When the total delay exceeds half a clock period, the communication between the master and the slave breaks down. At this point, the designer has the following options: lower the data rate, bring down the propagation, introduce delay, or compensation on the master side. Option 3 compensates for both cable delay and transceiver delay and therefore is an effective way to ensure that the system can run with high clock rates on long cables. The disadvantage is that the delay compensation increases the system complexity. In systems where delay compensations are either not possible, or in systems with short cables, the value of using transceivers with a short propagation delay is evident. A low propagation delay enables a higher clock rate without having to introduce delay compensation in the system.A master implementation consists of a serial port and a communication stack. Because the encoder protocols do not comply with standard ports, such as a UART, the peripherals found on most general-purpose microcontrollers cannot be used. Instead, the programmable logic of an FPGA enables implementation of dedicated communication ports in hardware and support of advanced features such as delay compensation. While an FPGA approach is flexible and can be tailored to the application, it also comes with disadvantages. When compared to a processor, an FPGA is costly, power hungry, and has significant time-to-market. The implementation of the EnDat interface discussed in this article is done on the ADSP-CM40x from Analog Devices, which is a processor targeting motor control drives. Besides peripherals for motor control, such as pulse width modulator (PWM) timers, analog-to-digital converters (ADCs), and sinc filters, the device has highly flexible serial ports (SPORTs). These SPORTs are capable of emulating a number of protocols, including encoder protocols such as EnDat and BiSS. Because of the rich peripheral set, it is possible to perform advanced motor control, as well as interfacing to an encoder with the same device. In other words, the need for an FPGA is eliminated.Figure 4. Experimental setup The EnDat 2.2 test setup is shown in figure 4. The EnDat slave is a standard servo motor from Kollmorgen (AKM22) with an EnDat encoder (ENC1113) mounted to the shaft. Three pairs of wires (data, clock, and power lines) connect the encoder to the transceiver board. There are two transceivers and power supply for the encoder on the EnDat PHY. One of the transceivers is used for the clock and the other transceiver is used for the data line. The EnDat master is realized with ADSP-CM40x using a mix of standard peripherals and software. Both the transmit port and receive port are implemented with flexible SPORTs.The EnDat protocol consists of a number of different frames of varying length. However, these frames are all based on the same sequence, as seen in figure 5. First, the master issues a command to the slave, then the slave processes the command and performs the necessary calculations. Finally, the slave sends the result back to the master. The transmit clock (Tx CLK) is generated by the processor ADSP-CM40x. Because of delays in the system, the data from the encoder will be out of phase with the transmit clock before they get back to the processor. To compensate for transport delay, tDELAY, the processor also issues a receive clock (Rx CLK), which is delayed by tDELAY compared to the transmit clock. Bringing the receive clock in phase with the data received from the slave is an effective way to compensate for the transport delay.Figure 5. EnDat transmit/receive sequence The clock signals from the processor are continuous, while the EnDat protocol specifies the clock must only be applied to the encoder during communication. At all other times the clock line must be held high. To handle this, the processor generates a clock enable signal, CLK EN, which is fed to the ADM3065E data enable pin. After exactly two clock periods (2T) the master starts clocking out the command on Tx DATA. The command is 6 bits long and is followed by two 0 bit. To control the data direction through the transceiver, the processor sets Bit Tx/Rx EN high while transmitting. While the slave prepares a response, the system enters a wait state where the master continues to apply clocks, but the data line is inactive. When the slave is ready to respond, the data line receive data is pulled high and the response is sent immediately after. After receiving the n bits response, the master stops the clock by setting CLK EN signal low. At the same time, the ENC CLK signal goes high. The data flow is half duplex and the traffic on the combined data line is shown as ENC data.Figure 6. EnDat data exchange Figure 6 shows test results from the EnDat system. The clock frequency used in the test is 8 MHz and the delay compensation is achieved by phase shifting the receive clock. The bottom signal is the command from the EnDat master. The command shown here is send position, which is two 0s, followed by six 1s, and ended with another two 0s. In total, the command is 10 bits long. The response from the encoder is the third signal from the top. The combined data line is the second signal from the top. Finally, the top signal is the clock applied to the encoder.Share this:TwitterFacebookLinkedInMoreRedditTumblrPinterestWhatsAppSkypePocketTelegram Tags: Chips & Components, Tools & Software Continue Reading Previous Smart lighting control with DALI 2.0 software stack for XMC1000 microcontrollersNext Cable connection concept for remote embedded modular computerslast_img read more